Sensys hinges are sold individually without mounting plates. If you do not have mounting plates already you will need to order them from the list below.
Cup Version: TB 53 (Press-in, Nickel Plated, Steel)
Cranking: 9.5mm
Depth Adjustment: -0.5mm / +3.5mm
Height Adjustment: +/- 2mm via mounting plate.
Overlay Adjustment: +0.5 / -3mm
Mounting Option: Half Overlay w/ Soft Close
Notes: The wide-angle hinge enables an optimal reveal (hairline reveal) and Negative door protrusion. Mounting Plate NOT included. For more detailed installation instructions please see the Detailed Hinge Installation Guide (PDF)
Sensys Overlay Selection Chart for Frameless Cabinets
Note: The overlay can be adjusted by varying the cup distance as noted above. Example: If you want a 16mm Overlay you can use a 0mm cranking hinge with either a 0mm plate & a cup distance of 3mm, or a 3mm plate with a cup distance of 6mm, both will result in a 16mm Overlay. Please keep in mind the max cup distance possible on the specific hinge you end up selecting. The Side Adjustment Screw on the Intermat Hinges will allow for an additional +1mm/-2.5mm of overlay adjustment if needed (Sensys allows for +2mm/-2mm). See below for a reference table of available hinges. Also Note: Less overlay = More Reveal! Download: Hinge Overlay Guide (Metric and Imperial)
* The 110° hinges can be adjusted to 85° by using the opening angle limiters for Sensys and Intermat respectively. * Sensys arms require Sensys mounting plates, and Intermat arms require Intermat plates. They are not cross compatible.
Normal processing time for all orders is one business day unless the item is flagged as a special order or has a noted lead time. Unforeseen events may cause delays (such as closed roads, weather, war, acts of God, etc). Please note that ship times are estimates only and are not guarantees.
